- #ANDROID WIFI TO 4G APP SWITCH INSTALL#
- #ANDROID WIFI TO 4G APP SWITCH ANDROID#
- #ANDROID WIFI TO 4G APP SWITCH SOFTWARE#
- #ANDROID WIFI TO 4G APP SWITCH PASSWORD#
- #ANDROID WIFI TO 4G APP SWITCH WINDOWS#
Access your router GUI (Graphic User Interface), usually done by typing the IP address of the router on a web browser.ī. From the advanced menu, you should make sure that the AP Band has been set to 2.4 GHz.Ī.
#ANDROID WIFI TO 4G APP SWITCH PASSWORD#
Hotspot password = Exact same password used for the Home zone of the Plume network. Hotspot name = Exact same name as the Plume network. From this menu, you should edit hotspot information. Once on the Hotspot & Tethering menu, you should access the "Wi-Fi hotspot" section.Į. Long press over the Hotspot icon to access the settingsĭ. If you don’t find Hotspot, at the bottom, tap Edit or the Pencil icon and drag Hotspot into your Quick Settings.Ĭ. On this menu you should look for the Hotspot option. "Network band" should be set to 2.4GHz and then click "Save".Ī. On the "Network password" you should add the same password as the one being used for the Home zone.Į. On the "Network name" you should add the same name as the one being used for the Plume network.ĭ. Select the Start button, then select Settings > Network & Internet > Mobile hotspot.
#ANDROID WIFI TO 4G APP SWITCH WINDOWS#
Windows Computer Mobile Hotspot ConfigurationĪ.
This means that you will need to use the exact same SSID (Network name) and password and then configure this "Hotspot" only on 2.4GHz.
#ANDROID WIFI TO 4G APP SWITCH ANDROID#
On this workaround, you will need to create a twin network using the "Mobile Hotspot" option of an Android device or a Windows computer or creating it directly from a Wi-Fi router. This will allow the device to learn the Plume network information to, later on, connect automatically to Plume. They should keep this in mind when moving these devices and pods around.Ī Twin network can be set up using a Windows computer, an Android phone, or an old wireless router.
#ANDROID WIFI TO 4G APP SWITCH SOFTWARE#
Make sure that the customer knows that because the IoT software is actually using the BBSID to connect, that each device will now always connect to their respective "assigned" pod. Important: If this last step is not followed, the mobile will always stay connected to the same BSSID and will not roam. Once all devices are installed, forget the network once again and connect your mobile back to the Plume network using the Wi-Fi settings on the phone. If no other devices need to be connected proceed to step 12. Repeat steps 3-9 if there are other devices to be connected through your home. Once the devices are connected, forget the network on your Android device. Use the IoT device App to set up the device. Enter the Wi-Fi password and then the phone will now be connected on 2.4 GHz to that pod. Ask the customer to connect on the strongest one broadcasting on a 2.4 GHz channel (1,6,11) and choose Connect. This will display a list with all the AP and channels available to connect. Tap on the signal with the Plume network name. You will see several pods broadcasting on different bands. Get close to the IoT device being installed. Open Wifi Analyzer and swipe right until you get to the AP List page or use the VIEW button on the top of the screen and then select the AP List. Forget the Plume network on the Android device. #ANDROID WIFI TO 4G APP SWITCH INSTALL#
Download and install Wifi Analyzer by Farproc the Android device. 
Once set up, you can usually continue to operate the device using your regular mobile.Īndroid users can force the mobile to connect on 2.4 GHz and once connected on 2.4 GHz, you set up the device. Since your mobile device is connected on 2.4 GHz, this can sometimes allow the App to continue with the setup process. Use a 2.4 GHz only mobile device to run the device's App and complete setup. Depending on how many of these devices you intend to connect, the process may take a bit of time and cannot be completed over email. We may be able to force your mobile device to connect on 2.4 GHz temporarily, so you can complete the IoT device setup. However, since Plume SSIDs broadcast on both 2.4 GHz and 5 GHz simultaneously, you may run into a situation where some of these devices are unable to join your Plume network because of their simplified Wi-Fi implementation. The Vast majority of these devices will connect to Plume without issue. Usually, these devices tend to be IoT devices that require you to use their app to set up the Wi-Fi connection for the device. Many devices state they are only compatible with 2.4 GHz networks or may prevent you from connecting them if your mobile is currently connected on 5 GHz.
0 kommentar(er)
